A2.129 : How to configure pole display for frontend

A2.129 : How to configure pole display for frontend

Question :

How to configure pole display for frontend.


Solution :

1. Plug in the customer display and install the driver.

2. Please check is your customer display installed properly (check in Device Manager and Device and Printer Setting).

3. If the device is installed properly, you should see the port number as image below:

000037-a.png

The display port for customer display above is COM2 (which is highlighted in purple)

4. Remember the display port number (which is COM2 in this example), and set the corresponds display port in POS.

For POS3/5 go to Front end > More Function > Configuration Setting > Device Setting > Select COM2 for Customer Display Pole > and try Epson as command (if Epson is not working, try with other command).

For FNB go to Front end > More Function > Setting > Configuration Setting > Device Setting > Select COM2 for Customer Display Pole > and try Epson as command (if Epson is not working, try with other command).

000037-b.png


--Source from AutoCount Wiki --

    • Related Articles

    • A2.135 : Login Frontend prompt error Class not Registered

      Question : When I open POS / FnB it prompts me a message Unhandled exception has occurred? System.Runtime.InteropServices.COMException (0x80040154): Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG)) Possible Reason : ...

    • A2.145 : How to Turn on 2nd Display (LCD Customer Screen)

      Question : I bought a new Monitor to use as POS 2nd Display (LCD Customer Screen), how to setup? Solution : 1. Right click on Desktop > Display settings 2. Multiple displays set to Extend these displays 3. Keep Changes 4. Login POS > More Function > ...

    • A2.16 : How to create new member at frontend

      Question : How to create new member at frontend? Solution : 1.First you must Enable Bonus point at Backend. To enable it, go to Point Of Sales > Maintenance > Pos Option Maintenance. Edit it and then go to Document Control 2 and tick "Enable Bonus ...

    • A2.80 : Can i fixed a certain points for item redemption at frontend?

      Question : I have set 300 point as a Redeem Bonus Point inside one of the stock item. Can this item be redeemed using 300 points at frontend? Answer : The answer is NO. This Redeem Bonus Point purposely created only for Bonus Point Redemption inside ...

    • A2.142 : How to add unit price column at second customer display?

      Question : How to add unit price column at second customer display? Solution : 1. First, login POS Front End program and stay at the login screen page. 2. Then switch to the second screen display page 3. Right click on the Column Tab and click on ...